H20 Concrete Formwork Beam

Devis gratuitEurope

1 H20 concrete formwork beams of SPRUCE and FIR.

2 The wing is made of carefully selected quality wood.

3 The core consists of a 3-layer panel, which ensures the stability of the beam and allows it to withstand all weather conditions.

4 Wing assemblies and core are inseparably joined by a splice.

5 Optional: plastic protective cap, shock resistant. Placed at the ends of the beam, this adapter provides additional protection against mechanical damage. This allows the beam to be reused several times and prolongs the beam’s life span while improving it’s strength.

6 The surface of the beams is protected by a waterproof coating which guarantees a long lifespan.

7 For greater ease of use, the length is indicated on each beam (beams are 20cm high and are produced in various standard lengths).

PROPERTIES plus Cheaper and high quality product for formwork
plus Excellent flexural strength
plus Minimal distortion
plus Waterproof and water resistant
plus Comes from sustainably managed European forests (FSC)
DRYING KD 12 +/- 2%
WEIGHT 4,7Kg/m
BOND Hot glue, melamine resin meets the requirements of EN 301 for bonding fingerjoints
WINGS • Made of Spruce or Fir, carefully selected
• The wing and the core are assembled by a joint splice and are bonded crosswise (relative to the rings)
• the cross dimensions are 80 x 40 mm
• The wings can be joined together in length
• The wing is milled along its core
• The edges of the wing are planed and chamfered (up to about 0.4 mm)
CORE 3 layered Plywood plate bonded so that the rings are vertical (relative to the cross section)
TREATEMENT The surface is completely protected by a waterproof and water-repellent coating
ADAPTABILITY With 3 layers in the core, the H20 beams can be cut to any length, without their properties being altered.
STANDARD LENGTHS 1,95 / 2,45 / 2,65 / 2,90 / 3,30 / 3,60 / 3,90 / 4,50 / 4,90 / 5,90 / maximum length: 6,00 m
Dimension Value Gap
Depth of the joist 200mm +/- 2mm
Depth of the wing 40mm +/- 6mm
Width of the wing 80mm +0,8 / 1,2mm
Thickness of the wing 29mm +/- 0,87mm

The values shown are valid for new formwork beams that have not yet been used, stored in suitable and properly used conditions. For beams which have been used several times, it is necessary (depending on different uses and requirements thereof) adding a proportional safety factor.
PACKING • By full container of 4600 ml
• By full truckload of 5000 ml
TRUCK PACKINGDimensions • Standard Package 50 pieces / package
• Ready for immediate use on site
• Parcels placed on wooden slats that protect joists and allow you to move easily with a forklift
CONTAINER PACKINGDimensions • Standard Package 100 pieces / package
• Ready for immediate use on site
• Parcels placed on wooden slates that protect joists and allow you to move easily with a forklift
DELIVERY LEAD TIME Within 3 weeks after the client has made the request
APPLICATIONS BPW & CONCRETE FORMWORK– all kinds of construction with concrete

Free quote

The technical sheet above contains the standard parameters of a product that is also available in many variants. Consult us and get a price for the wood beam formwork you need.

requested product : H20 Concrete Formwork Beam

Please fill in your contact informations

Company (*)

Contact name (*)

Email (*)


Place of delivery (*)

Please fill in your order specification

Volume (1 full truck = 5000 lm)

1,95 m
(1 pack = 97,5 lm)

2,45 m
(1 pack = 122,5 lm)

2,65 m
(1 pack = 132,5 lm)

2,90 m
(1 pack = 145 lm)

3,30 m
(1 pack = 165 lm)

3,60 m
(1 pack = 180 lm)

3,90 m
(1 pack = 195 lm)

4,50 m
(1 pack = 225 lm)

4,90 m
(1 pack = 245 lm)

5,90 m
(1 pack = 295 lm)


Delivery time

Your message