H20 concrete formwork beams of SPRUCE and FIR. The wing is made of carefully selected quality wood. The core consists of a 3-layer panel, which ensures the stability of the beam and allows it to withstand all weather conditions. Wing assemblies and core are inseparably joined by a splice. Optional: plastic protective cap, shock resistant. Placed at the ends of the beam, this adapter provides additional protection against mechanical damage. This allows the beam to be reused several times and prolongs the beam’s life span while improving it’s strength. The surface of the beams is protected by a waterproof coating which guarantees a long lifespan. For greater ease of use, the length is indicated on each beam (beams are 20cm high and are produced in various standard lengths). |
||||||||||||||||
PROPERTIES | Cheaper and high quality product for formwork Excellent flexural strength Minimal distortion Waterproof and water resistant Comes from sustainably managed European forests (FSC) |
|||||||||||||||
MATERIAL | SPRUCE and FIR | |||||||||||||||
DRYING | KD 12 +/- 2% | |||||||||||||||
WEIGHT | 4,7Kg/m | |||||||||||||||
BOND | Hot glue, melamine resin meets the requirements of EN 301 for bonding fingerjoints | |||||||||||||||
WINGS | • Made of Spruce or Fir, carefully selected • The wing and the core are assembled by a joint splice and are bonded crosswise (relative to the rings) • the cross dimensions are 80 x 40 mm • The wings can be joined together in length • The wing is milled along its core • The edges of the wing are planed and chamfered (up to about 0.4 mm) |
|||||||||||||||
CORE | 3 layered Plywood plate bonded so that the rings are vertical (relative to the cross section) | |||||||||||||||
CERTIFICATIONS | DIN EN 13377 ; FSC | |||||||||||||||
TREATEMENT | The surface is completely protected by a waterproof and water-repellent coating | |||||||||||||||
ADAPTABILITY | With 3 layers in the core, the H20 beams can be cut to any length, without their properties being altered. | |||||||||||||||
STANDARD LENGTHS | 1,95 / 2,45 / 2,65 / 2,90 / 3,30 / 3,60 / 3,90 / 4,50 / 4,90 / 5,90 / maximum length: 6,00 m | |||||||||||||||
DIMENSIONS AND DEVIATIONS |
|
|||||||||||||||
TECHNICAL CHARACTERISTICS | ||||||||||||||||
The values shown are valid for new formwork beams that have not yet been used, stored in suitable and properly used conditions. For beams which have been used several times, it is necessary (depending on different uses and requirements thereof) adding a proportional safety factor. |
||||||||||||||||
PACKING | • By full container of 4600 ml • By full truckload of 5000 ml |
|||||||||||||||
TRUCK PACKING | • Standard Package 50 pieces / package • Ready for immediate use on site • Parcels placed on wooden slats that protect joists and allow you to move easily with a forklift |
|||||||||||||||
CONTAINER PACKING | • Standard Package 100 pieces / package • Ready for immediate use on site • Parcels placed on wooden slates that protect joists and allow you to move easily with a forklift |
|||||||||||||||
DELIVERY LEAD TIME | Within 3 weeks after the client has made the request | |||||||||||||||
APPLICATIONS | BPW & CONCRETE FORMWORK– all kinds of construction with concrete | |||||||||||||||
All items related to the keyword : Europe
LVL
3-ply Concrete Formwork Pannel
3 ply panel made from SPRUCE and from FIR. It is composed of three layers of wood laminated crosswise, with a frame around the core layer. The whole surface is protected with melamine resin applied by hot pressing, which makes it impermeable and water-repellent panel, and ensures the smooth surface concrete constructions. The edge strip is protected by a waterproof coating that prevents moisture from entering the interior of the panel and thus provides additional strength. |
||||||
|
||||||
PROPERTIES |
Cheaper and high quality product for concrete formwork Excellent flexural strength Minimal distortion Waterproof and water resistant Comes from sustainably managed European forests (FSC) |
|||||
|
||||||
CERTIFICATIONS | DIN # 68705 ; FSC | |||||
PACKING | By full truck or containers of appoximately 2000 m2 | |||||
PACKAGING | By securely strapped pallets (21mm – 50 pieces ; 27mm – 40 pieces) | |||||
DELIVERY LEAD TIME | Within 3 weeks after the client has sent the request | |||||
APPLICATIONS | BTP & CONCRETE FORMWORK– all types of concrete structures (bridges, tunnels, walls, ceilings, …) | |||||
|
||||||
H20 Concrete Formwork Beam
H20 concrete formwork beams of SPRUCE and FIR. The wing is made of carefully selected quality wood. The core consists of a 3-layer panel, which ensures the stability of the beam and allows it to withstand all weather conditions. Wing assemblies and core are inseparably joined by a splice. Optional: plastic protective cap, shock resistant. Placed at the ends of the beam, this adapter provides additional protection against mechanical damage. This allows the beam to be reused several times and prolongs the beam’s life span while improving it’s strength. The surface of the beams is protected by a waterproof coating which guarantees a long lifespan. For greater ease of use, the length is indicated on each beam (beams are 20cm high and are produced in various standard lengths). |
||||||||||||||||
PROPERTIES |
Cheaper and high quality product for formwork Excellent flexural strength Minimal distortion Waterproof and water resistant Comes from sustainably managed European forests (FSC) |
|||||||||||||||
MATERIAL | SPRUCE and FIR | |||||||||||||||
DRYING | KD 12 +/- 2% | |||||||||||||||
WEIGHT | 4,7Kg/m | |||||||||||||||
BOND | Hot glue, melamine resin meets the requirements of EN 301 for bonding fingerjoints | |||||||||||||||
WINGS |
• Made of Spruce or Fir, carefully selected • The wing and the core are assembled by a joint splice and are bonded crosswise (relative to the rings) • the cross dimensions are 80 x 40 mm • The wings can be joined together in length • The wing is milled along its core • The edges of the wing are planed and chamfered (up to about 0.4 mm) |
|||||||||||||||
CORE | 3 layered Plywood plate bonded so that the rings are vertical (relative to the cross section) | |||||||||||||||
CERTIFICATIONS | DIN EN 13377 ; FSC | |||||||||||||||
TREATEMENT | The surface is completely protected by a waterproof and water-repellent coating | |||||||||||||||
ADAPTABILITY | With 3 layers in the core, the H20 beams can be cut to any length, without their properties being altered. | |||||||||||||||
STANDARD LENGTHS | 1,95 / 2,45 / 2,65 / 2,90 / 3,30 / 3,60 / 3,90 / 4,50 / 4,90 / 5,90 / maximum length: 6,00 m | |||||||||||||||
DIMENSIONS AND DEVIATIONS |
|
|||||||||||||||
TECHNICAL CHARACTERISTICS | ||||||||||||||||
The values shown are valid for new formwork beams that have not yet been used, stored in suitable and properly used conditions. For beams which have been used several times, it is necessary (depending on different uses and requirements thereof) adding a proportional safety factor. |
||||||||||||||||
PACKING |
• By full container of 4600 ml • By full truckload of 5000 ml |
|||||||||||||||
TRUCK PACKING |
• Standard Package 50 pieces / package • Ready for immediate use on site • Parcels placed on wooden slats that protect joists and allow you to move easily with a forklift |
|||||||||||||||
CONTAINER PACKING |
• Standard Package 100 pieces / package • Ready for immediate use on site • Parcels placed on wooden slates that protect joists and allow you to move easily with a forklift |
|||||||||||||||
DELIVERY LEAD TIME | Within 3 weeks after the client has made the request | |||||||||||||||
APPLICATIONS | BPW & CONCRETE FORMWORK– all kinds of construction with concrete | |||||||||||||||
|
||||||||||||||||
T&G Flooring CP / C
Panel specifically designed for use in floor structures. Adorned with both surfaces beautifully sanded without open defects. Edges machined tongue-and-groove (on the long sides) for easy assembly. Excellent properties – mechanical strength, acoustic, thermal. Accuracy of thickness. CE Declaration of Conformity 2+ “roofs and floors.” | ||||||||||||||||||||||||||
QUALITY OF THE FACES |
CP Beautifully sanded surface, allows for some small sound knots and repairs (wood pellet). / C COUNTER-FACE sanded,displays certain open defaults. |
|||||||||||||||||||||||||
COMPOSITION | Interior Mix of SOFTWOODS | |||||||||||||||||||||||||
GRAIN | Long grain | |||||||||||||||||||||||||
GLUE | WBP (phenolic – class 3 – exterior) according to the EN 636-3 standard E1 very low formaldehyde emissions | |||||||||||||||||||||||||
MACHINING R&L |
Edges machined tongue-and-groove (the long sides) for easy assembly Optional on request: machining of four edges. |
|||||||||||||||||||||||||
TREATMENT | Optional on demand: FUNGICIDE ANTI-MOISTURE TREATMENT (basilite) | |||||||||||||||||||||||||
CERTIFICATIONS | CE 2+ Marking (CE S structure) structural applications according to the EN 13986 standard ; FSC ; EN 322dryness: KD 10 +/-2% ; EN 324-2 straightness: tol +/- 1mm ; squareness: tol +/- 1mm | |||||||||||||||||||||||||
FORMAT dimensional tolerances according to EN 324-1 standards |
2400×1200 mm
|
|||||||||||||||||||||||||
|
||||||||||||||||||||||||||
FORMATdimensional tolerances according to EN 324-1 standards |
2400×600 mm
|
|||||||||||||||||||||||||
|
||||||||||||||||||||||||||
PACKING | By full truckload of approximately 45m3 |
Slab Flooring C / C
T&G Sub-roofing C / C
Panel specifically designed for use in sub-roofing. 2 non-sanded faces, “standard” quality, displaying some open defects. Preservation treatment (anti-mold fungicide, insecticide, anti-termite). Machining tongue-and-groove on both sides (lengths). Excellent mechanical strength. CE Declaration of Conformity 2+ “roofs and floors.” |
|||||||||||||||||||||||||||||||
QUALITY OF THE SURFACE |
C Surface may exhibits sound knots and falling knots of a diameter of maximum 35mm, and cracks with a maximum size of 12mm. / C COUNTER-FACE Surface may exhibits sound knots and falling knots of a diameter of maximum 35mm, and cracks with a maximum size of 12mm. |
||||||||||||||||||||||||||||||
COMPOSITION | Interior Mix of SOFTWOODS | ||||||||||||||||||||||||||||||
GRAIN | Long grain | ||||||||||||||||||||||||||||||
GLUE | WBP (phenolic – class 3 – exterior) according to the EN 636-3 standard E1 very low formaldehyde emissions | ||||||||||||||||||||||||||||||
MACHINING R&L |
Edges machined tongue-and-groove on the lengths. Optional on request : machining of 4 edges. |
||||||||||||||||||||||||||||||
TREATMENT | Preservation treatment (anti-mold fungicide, insecticide, anti-termite) – (basilite) | ||||||||||||||||||||||||||||||
CERTIFICATIONS | CE 2+ Marking (CE S structure) structural applications according to the EN 13986 standard ; FSC ; EN 322drying: KD 10 +/-2% ; EN 324-2 straightness: tol +/- 1mm ; squareness: tol +/- 1mm | ||||||||||||||||||||||||||||||
FORMAT dimensional tolerances according to EN 324-1 standard |
2400×1200 mm
|
||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||
FORMAT dimensional tolerances according to EN 324-1 standard |
2400×600 mm
|
||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||
PACKING | By full truckload of approximately 45m3 |
Structural “visible” CP / C
Plywood for structural use + display. Used for exposed walls for example. Adorned with a beautiful sanded surface (visible quality). CE Declaration of Conformity 2+ (structure) “Wall Enclosure”.. | ||||||||||||||||||||||||||||||||||||
QUALITY OF THE FACES |
CP Sanded surface, showing some minimal defects, repaired / CCOUNTER-FACE sanded and may include some open defects. |
|||||||||||||||||||||||||||||||||||
COMPOSITION | Interior : Mix of SOFTWOOD | |||||||||||||||||||||||||||||||||||
GRAIN | Long grain | |||||||||||||||||||||||||||||||||||
GLUE | WBP (phenolic – class 3 – exterior) according to the EN 636-3 standard E1 very low formaldehyde emissions | |||||||||||||||||||||||||||||||||||
TREATMENT | Optional upon requst : preservation treatment | |||||||||||||||||||||||||||||||||||
CERTIFICATIONS | CE 2+ Marking (CE S structure) structural applications according to the EN 13986 standard ; FSC ; EN 322drying: KD 10 +/-2% ; EN 324-2 straightness: tol +/- 1mm ; squarage: tol +/- 1mm | |||||||||||||||||||||||||||||||||||
FORMAT dimensional tolerances according to EN 324-1 standard |
2400×1200 mm
|
|||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
PACKING | By full truckload of approximately 45m3 |
Structural “non-visible” C+ / C
Plywood for structural use, non-visible. Versatile and economical solution for many structural uses in construction. Good mechanical strength properties. CE Declaration of Conformity 2+. | ||||||||||||||||||||||||||||||||||||
QUALITY OF THE FACES |
C+ SURFACE sanded, displays certain open defects, minimal defects. / C COUNTER-FACE sanded can include certain open defects. |
|||||||||||||||||||||||||||||||||||
COMPOSITION | Interior : Mix of SOFTWOOD | |||||||||||||||||||||||||||||||||||
GRAIN | Long grain | |||||||||||||||||||||||||||||||||||
GLUE | WBP (phenolic – class 3 – exterior) according to the EN 636-3 standard E1 very low formaldehyde emissions | |||||||||||||||||||||||||||||||||||
TREATMENT | Optional on request: preservation treatment | |||||||||||||||||||||||||||||||||||
CERTIFICATIONS | CE 2+ Marking(CE S structure) structural applications according to the EN 13986 standard ; FSC ; EN 322 dryness: KD 10 +/-2% ; EN 324-2 straightness: tol +/- 1mm ; squareness: tol +/- 1mm | |||||||||||||||||||||||||||||||||||
FORMAT dimensional tolerances according to EN 324-1 standard |
2400×1200 mm
|
|||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
PACKING | By full truckload of approximately 45m3 |
Packaging III / III
Panel specifically for packaging and crating. Quality economical solution for use requiring no particular mechanical strength. | ||||||||||||||||||||||||||||||||||||
QUALITY OF THE FACES |
III Non-sanded SURFACE, displays certain open defects. / III COUNTER-FACE non-sanded, displays certain open defects |
|||||||||||||||||||||||||||||||||||
COMPOSITION | Interior : Mix of SOFTWOODS | |||||||||||||||||||||||||||||||||||
GRAIN | Long grain | |||||||||||||||||||||||||||||||||||
GLUE | WBP (phenolic – class 3 – exterior) according to the EN 636-3 standard E1 very low formaldehyde emissions | |||||||||||||||||||||||||||||||||||
CERTIFICATIONS | CE 4 (usage non-structural) ; FSC ; EN 322 dryness: KD 10 +/-2% ; EN 324-2 straightness: tol +/- 1mm ; squarness: tol +/- 1mm | |||||||||||||||||||||||||||||||||||
FORMAT dimensional tolerances according to EN 324-1 standard |
2400×1200 mm
|
|||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
FORMAT dimensional tolerances according to EN 324-1 standard |
2700×1200 mm
|
|||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
FORMAT dimensional tolerances according to EN 324-1 standard |
3050×1200 mm
|
|||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
PACKING | By full truckload of appoximately 45m3 |
F/F Filmed Mirror Form Plywood
Filmed Mirror Plywood is an alternative for Filmed Birch Plywood. It is ideal for concrete formwork and it offers the possibility to be re-employed several times. It is composed by layers of Scots Pine alternating with thinner layers of Birch. It is very solid; especially with crossed grain. | |||||||||||||
FILM TYPES Imported brown films. Weight : 120 g/m2, 150 g/m2, 167 g/m2 or 220 g/m2. Different types of films available on demand |
FACE : Smoothe Phenolic Dynea Film 120 g/m2 Quality I (dark brown) COUNTER-FACE : Smoothe Phenolic Dynea Film 120 g/m2 Quality I (dark brown) |
||||||||||||
COMPOSITION | Interior: Combination of European BIRCH and SCOTS PINE | ||||||||||||
GRAIN | Long grain or crossed grain | ||||||||||||
GLUE | WBP (phenolic – class 3 – exterior) according to the EN 314-3 standard E1 very low formaldehyde emissions other bonds available on demand | ||||||||||||
EDGE PROTECTION | 4 treated edges waterproof acrylic paint (color film) | ||||||||||||
AVERAGE DENSITY | 510 kg/m3 | ||||||||||||
CERTIFICATIONS | CE 2+ Marking(CE S structure) structural applications according to the EN 13986 standard ; FSC | ||||||||||||
STANDARD FORMATS |
1250×2500 ; 1220×2440 mm
|
||||||||||||
|
|||||||||||||
PACKING | By full truckload of approximately 38m3 |