You are in the category Diverse Range.

LVL


Devis gratuitEurope

1 H20 concrete formwork beams of SPRUCE and FIR.
2 The wing is made of carefully selected quality wood.

3 The core consists of a 3-layer panel, which ensures the stability of the beam and allows it to withstand all weather conditions.

4 Wing assemblies and core are inseparably joined by a splice.

5 Optional: plastic protective cap, shock resistant. Placed at the ends of the beam, this adapter provides additional protection against mechanical damage. This allows the beam to be reused several times and prolongs the beam’s life span while improving it’s strength.

6 The surface of the beams is protected by a waterproof coating which guarantees a long lifespan.

7 For greater ease of use, the length is indicated on each beam (beams are 20cm high and are produced in various standard lengths).

PROPERTIES plus Cheaper and high quality product for formwork
plus Excellent flexural strength
plus Minimal distortion
plus Waterproof and water resistant
plus Comes from sustainably managed European forests (FSC)
MATERIAL SPRUCE and FIR
DRYING KD 12 +/- 2%
WEIGHT 4,7Kg/m
BOND Hot glue, melamine resin meets the requirements of EN 301 for bonding fingerjoints
WINGS • Made of Spruce or Fir, carefully selected
• The wing and the core are assembled by a joint splice and are bonded crosswise (relative to the rings)
• the cross dimensions are 80 x 40 mm
• The wings can be joined together in length
• The wing is milled along its core
• The edges of the wing are planed and chamfered (up to about 0.4 mm)
CORE 3 layered Plywood plate bonded so that the rings are vertical (relative to the cross section)
CERTIFICATIONS DIN EN 13377 ; FSCFSC
TREATEMENT The surface is completely protected by a waterproof and water-repellent coating
ADAPTABILITY With 3 layers in the core, the H20 beams can be cut to any length, without their properties being altered.
STANDARD LENGTHS 1,95 / 2,45 / 2,65 / 2,90 / 3,30 / 3,60 / 3,90 / 4,50 / 4,90 / 5,90 / maximum length: 6,00 m
DIMENSIONS AND DEVIATIONSDimensions
Dimension Value Gap
Depth of the joist 200mm +/- 2mm
Depth of the wing 40mm +/- 6mm
Width of the wing 80mm +0,8 / 1,2mm
Thickness of the wing 29mm +/- 0,87mm
TECHNICAL CHARACTERISTICS
characteristics

The values shown are valid for new formwork beams that have not yet been used, stored in suitable and properly used conditions. For beams which have been used several times, it is necessary (depending on different uses and requirements thereof) adding a proportional safety factor.
PACKING • By full container of 4600 ml
• By full truckload of 5000 ml
TRUCK PACKINGDimensions • Standard Package 50 pieces / package
• Ready for immediate use on site
• Parcels placed on wooden slats that protect joists and allow you to move easily with a forklift
CONTAINER PACKINGDimensions • Standard Package 100 pieces / package
• Ready for immediate use on site
• Parcels placed on wooden slates that protect joists and allow you to move easily with a forklift
DELIVERY LEAD TIME Within 3 weeks after the client has made the request
APPLICATIONS BPW & CONCRETE FORMWORK– all kinds of construction with concrete
GALLERY
Demande de prix

Diverse Concrete Formwork Range


Check out our range of “various concrete formwork” and send us a request for 3-ply panels or H20 beams that you are specifically looking for. We will offer the best possible conditions.

DIVERSE FORMWORK RANGE

3-PLY CONCRETE FORMWORK PANEL
Shuttering panel for all types of concrete construction, consisting of three layers of wood laminated crosswise, with a frame around the core layer. Smooth, waterproof and water resistant, protected with melamine resin. Excellent flexural strength. Many reuses.
SPRUCE AND FIR
EUROPE
Economical product that is made to a concrete formwork quality
By 2000 m2 full truckload/container
CONCRETE FORMWORK BEAM H20
Concrete formwork beam for all types of concrete construction. Composed of a core (3-ply panel) and wings joined by splice joints (glue melamine). Surface completely protected by a waterproof and water-repellent coating. Adaptable (lengths, and dimensions). Excellent flexural strength. Many reuses.
SPRUCE AND FIR
EUROPE
Economical product that is made to a concrete formwork quality
By 4600 ml full truckload/container

3-ply Concrete Formwork Pannel


Devis gratuitEurope
1 3 ply panel made from SPRUCE and from FIR. It is composed of three layers of wood laminated crosswise, with a frame around the core layer.

2 The whole surface is protected with melamine resin applied by hot pressing, which makes it impermeable and water-repellent panel, and ensures the smooth surface concrete constructions.

3 The edge strip is protected by a waterproof coating that prevents moisture from entering the interior of the panel and thus provides additional strength.
STRUCTURE structure structure structure structure
PROPERTIES plus Cheaper and high quality product for concrete formwork
plus Excellent flexural strength
plus Minimal distortion
plus Waterproof and water resistant
plus Comes from sustainably managed European forests (FSC)
Caractéristiques techniques
Click here to enlarge
CERTIFICATIONS DIN # 68705 ; FSCFSC
PACKING By full truck or containers of appoximately 2000 m2
PACKAGING By securely strapped pallets (21mm – 50 pieces ; 27mm – 40 pieces)
DELIVERY LEAD TIME Within 3 weeks after the client has sent the request
APPLICATIONS BTP & CONCRETE FORMWORK– all types of concrete structures (bridges, tunnels, walls, ceilings, …)
GALLERY
Demande de prix

H20 Concrete Formwork Beam


Devis gratuitEurope

1 H20 concrete formwork beams of SPRUCE and FIR.

2 The wing is made of carefully selected quality wood.

3 The core consists of a 3-layer panel, which ensures the stability of the beam and allows it to withstand all weather conditions.

4 Wing assemblies and core are inseparably joined by a splice.

5 Optional: plastic protective cap, shock resistant. Placed at the ends of the beam, this adapter provides additional protection against mechanical damage. This allows the beam to be reused several times and prolongs the beam’s life span while improving it’s strength.

6 The surface of the beams is protected by a waterproof coating which guarantees a long lifespan.

7 For greater ease of use, the length is indicated on each beam (beams are 20cm high and are produced in various standard lengths).

PROPERTIES plus Cheaper and high quality product for formwork
plus Excellent flexural strength
plus Minimal distortion
plus Waterproof and water resistant
plus Comes from sustainably managed European forests (FSC)
MATERIAL SPRUCE and FIR
DRYING KD 12 +/- 2%
WEIGHT 4,7Kg/m
BOND Hot glue, melamine resin meets the requirements of EN 301 for bonding fingerjoints
WINGS • Made of Spruce or Fir, carefully selected
• The wing and the core are assembled by a joint splice and are bonded crosswise (relative to the rings)
• the cross dimensions are 80 x 40 mm
• The wings can be joined together in length
• The wing is milled along its core
• The edges of the wing are planed and chamfered (up to about 0.4 mm)
CORE 3 layered Plywood plate bonded so that the rings are vertical (relative to the cross section)
CERTIFICATIONS DIN EN 13377 ; FSCFSC
TREATEMENT The surface is completely protected by a waterproof and water-repellent coating
ADAPTABILITY With 3 layers in the core, the H20 beams can be cut to any length, without their properties being altered.
STANDARD LENGTHS 1,95 / 2,45 / 2,65 / 2,90 / 3,30 / 3,60 / 3,90 / 4,50 / 4,90 / 5,90 / maximum length: 6,00 m
DIMENSIONS AND DEVIATIONSDimensions
Dimension Value Gap
Depth of the joist 200mm +/- 2mm
Depth of the wing 40mm +/- 6mm
Width of the wing 80mm +0,8 / 1,2mm
Thickness of the wing 29mm +/- 0,87mm
TECHNICAL CHARACTERISTICS
characteristics

The values shown are valid for new formwork beams that have not yet been used, stored in suitable and properly used conditions. For beams which have been used several times, it is necessary (depending on different uses and requirements thereof) adding a proportional safety factor.
PACKING • By full container of 4600 ml
• By full truckload of 5000 ml
TRUCK PACKINGDimensions • Standard Package 50 pieces / package
• Ready for immediate use on site
• Parcels placed on wooden slats that protect joists and allow you to move easily with a forklift
CONTAINER PACKINGDimensions • Standard Package 100 pieces / package
• Ready for immediate use on site
• Parcels placed on wooden slates that protect joists and allow you to move easily with a forklift
DELIVERY LEAD TIME Within 3 weeks after the client has made the request
APPLICATIONS BPW & CONCRETE FORMWORK– all kinds of construction with concrete
GALLERY
Demande de prix

(Français) Poutrelles H20 – Ventes au colis


Sorry, this entry is only available in Français.